1.9 external data source compatibility External serial data sources intended for use with the MX20 should be checked for compatibility before installation.
Table of Contents Apollo GX50/60/65 Installation Manual iii list OF tables table 1 package contents table 2 comm interface connector pinout.
The external navigation source may need to be properly configured prior to this francais step!
Carefully plan which external devices are to be connected to which MX20 ports observing the special characteristics of ports 3 and installation considerations existing sensors When the MX20 is installed with external sensors, these sensors must be installed with manufacturer's data.
This manual does only not cover the installation or calibration of the actual ART unit.
After selecting the desired waypoint, press enter route from your present position to the Direct-Todestination waypoint ete aHIO 00:12.002 Brg 346.2nm 34Press SEL to Create a New Enter a New Plan Name.
Use support brackets to attach the rear of the frame to the aircraft.
Ciet-20HD) Regular duty Crimp tool: ITT part # tutorial (Desc.Transponder (if equipped) NAV/VOR/ILS unit and tune to a local frequency (VOR/DME) Any other navigation source Radio Altimeter 34 Apollo MX20 Installation Manual 43 Installation DME ADF VHF Comm Transceiver Encoding Altimeter Flight Director Marker Beacon Receiver Weather Radar Ground Proximity Warning System or Enhanced.Turn the small knob as necessary to view additional waypoints.The radome should NOT be installed during these tests as visual verification of antenna movement is required.The aircraft must be far enough from buildings to avoid multipath effects.Follow the guidelines as established in AC B, Chapter 10, section.Other publications GX50/60 Installation Manual, P/N WX-500 Installation Manual, Goodrich Avionics P/N SKY899 ebooks Installation Manual, Goodrich Avionics P/N RDR2000 Installation Manual, Allied Signal P/nstallation Manual, Ryan tcad P/N BX Installation Manual, Ryan tcad P/N WSI InFlight Installation Manual, WSI P/N GTX330, GTX330D Transponder Manual, Garmin.The two model options are SKY497 and SKY899.M22520/2-08) For pin P/N (High Density Connector I/O Only) Astro Tool Corp Phone (503) SW TV Highway Fax (503) Beaverton, OR Crimp tool: Astro Tool part # Positioner: Astro Tool part # license requirements There repair are no license requirements for the MX operating instructions MX20.While viewing either the Auto-Descentor End Alt End 5nm before PDX at 1027 500/min 200kts the Nav function, turn office the large knob to display Parallel Track Parallel Track Offset: Standby right.4nm Offset: Use left12.4nm left.0nm 59ete pCVO 00:22.1nm GPS Position 4410.11N pdop.